FPGA Based SPWM Bridge Inverter
- 1 School of Microelectronic Engineering, Universiti Malaysia Perlis (UniMAP). Blok A, Malaysia
- 2 School of Computer and Communication Engineering Universiti Malaysia Perlis (UniMAP). Blok A, Kompleks Pusat Pengajian Jejawi 1 Jalan Kangar-Arau, 02600 Jejawi, PERLIS, Malaysia
Abstract
This study presents methodology to generate sinusoidal pulse width modulation (SPWM) signal using Field Programmable Gate Array, FPGA technology. We discussed the unipolar switching scheme and the methodology to generate the signal with the predetermined switching frequencies. Simulation on the designed pulses was conducted using Altera Max Plus II simulation tools. This simulation method was used to get the desired sinusoidal pulse width modulated signal via programming. Designing the best switching frequency for inverter was important in order to get the best approximation of the sinusoidal signal as produced by an ideal inverter. The smoother inverter switching signal, the better output waveform from the inverter and thus produced output signal with less harmonics distortion. Simulation was done before being tested on the FPGA board for the next stage.
DOI: https://doi.org/10.3844/ajassp.2007.584.586
Copyright: © 2007 M. N. Md Isa, M.I. Ahmad, Sohiful A.Z. Murad and M.K. Md Arshad. This is an open access article distributed under the terms of the
Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
- 3,489 Views
- 3,441 Downloads
- 14 Citations
Download
Keywords
- Sinusoidal pulse width modulation (SPWM)
- unipolar SPWM
- Field programmable gate array (FPGA)
- verilog
- very high speed integrated circuit hardware description language (VHDL)
- inverter
- power electronics